Fanco Luna 200, Installation Manual, Page: 6 / 8

6
9. Replace front fascia by locating spring hole slots in body/fan. Allow springs to pull the cover plate up over
the fan cavity and against the ceiling surface.
MODELS WITH LIGHT : Before completely replacing the fascia, re-connect the light cable connector.
10. Turn on mains power.
MODELS WITH LIGHT
1. There is a switch to adjust the color temperature on back of the led panel.
2. Choose the color temperature according to your personal preference:
o CW = Cool White
o DL = Daylight/Natural
o WW = Warm White
MAINTENANCE:
• The product surfaces must be regularly cleaned from dirt and dust.
• Cut off power supply prior to any maintenance operations.
• Use a soft cloth or compressed air to remove external dust.
• To clean the internal surfaces, remove the decorative cover.
• Clean the decorative cover using a soft cloth.
• Thoroughly clean every 6 months using a soft dry cloth or a brush.
• After cleaning, mount the decorative cover back on.
• Avoid water dripping on the electric components.
• Supply power to the fan.