2. If the battery is low it will affect the sensitivity of the remote control and the signal reception
and must be replaced (the LED indicator light will flash a warning when the battery runs low).
3. Please remove the battery if the remote control is not being used for a long time.
4. If multiple fans are installed near the fan to be paired, power to the other fans should be
turned off before pairing.
Considerations when installing multiple ceiling fans:
Sometimes you may encounter a remote-control issue when installing multiple fans. For the
purposes of this troubleshooting guide:
Fan A uses Remote control A and Receiver A, while Fan B uses Remote control B and Receiver B.
1. Isolate power to one fan only when pairing the remotes
When installing two or more fans, you should manually isolate power to Fan B while
completing the pairing process on Fan A. If power is not isolated to one of the fans when the
power is restored at the fuse box, then both receivers will be put into “learning mode” such that
when you try to pair Remote control A to Receiver A, Receiver B will also be in learning mode
and might pair to Remote control A too.
FUNCTIONS OF THE TRANSMITTER
16
