INS TAL L ATION ST E P :
1 Insert 3 blades into upper
aligning plate,and secure with
6 screws and washers.
Put the motor housing through the
extension down rod and secure
with 3 screws.
Align the downrod holes with
extension downrod holes and
insert the bolt. Insert the R pin
into the bolt and tighten the
screws in the extension downrod.
Move the coupling cover down.
Put the canopy through the down
rod. Place the hanging ball on top
of the down rod and secure it with
the screw.
Secure the hanging bracket to the ceiling joist or
suitable structure with the four long fixing screws
provided.And make the following steps.
1)Place the hanging ball of fan into the bracket.
2)Put the receiver on top of the hanging ball and
connect the wires.
3)Connect the push plug of the wires from fan to
push plug of the wires from receiver.
4)Place the canopy over the bracket and align the
canopy holes with the screws and tighten.
5)Place the canopy ring into canopy.
6
5
6
Motor
YELLOW GREEN
YELLOW GREEN
YELLOW GREEN
BROWN
BLUE
BROWN
RED
RED
RECEIVER
GRAY
BROWN
RED
RED
GRAY
AC L
AC N
EARTHING
WIRE
FILTER
YELLOW
GREEN
BROWN
BLUE
YELLOW
GREEN
BROWN
BLUE
YELLOW
GREEN
BROWN
BLUE
TERMINAL
BLOCK
For light kit version
Connect the push plug wire of the light
kit to the push plug from motor.
Put the light kit on bottom of the blade
and then revolve it clock wise till it got locked.
5
BLACK
FOR FAN WITH LIGHT KIT
BLACK
