Fanco CFFCINID22LBLSMR, Installation Manual

Page: 14 / 16

13
TROUBLESHOOTING:
Trouble Possible Cause Suggested Remedy
Fans does not start
after pairing process. Remote and receiver are not
paired successfully
Battery flat in remote control
Loose wire connections or plugs
to fan/receiver
No power goes into the fan Re-pair the receiver and remote
Replace the battery in remote control
Check wire connections and ensure plugs are
positively connected
Check RCD/Switch board and wiring on
premises
Fan keeps beeping, but
will not start. Loose wire connections or plugs
to fan/receiver Check wire connections and ensure plugs are
positively connected
Fan wobbles. Screws on down rod are not
tightened
Blades are not balanced Retighten the screws on down rod
Use the balancing kit to balance the blades.
Fan makes clicking
sound. Coupling cover does not sit
securely on motor housing
Rubber ring on coupling cover is
removed Adjust coupling cover and ensure it sits
properly on the motor housing
Check couple cover and e
nsure there’s a
rubber ring on the top of the cover.