Fanco Breeze AC, Installation Manual

Page: 9 / 14

8
4. 125 mm and 250 mm downrods are included in the box. Pick one from the box. Keep the
side ith 3 holes up.
3
Holes
up
Feed the main motor wire plug up through the inside of the downrod, then insert the
downrod into the motor bush. Gently push the cross-pin through the holes aligned with the
base of the motor bush and downrod. CAUTION: DO NOT force the cross-pin, gently wiggle
and rotate it until it glides through both holes. Replace the cotter-pin on the other side of
the cross-pin to secure the downrod to the motor bush. Tighten up both cross screws to
make the downrod rigid in the motor bush.
a b
5. Snuggle the coupling cover down onto the top of the motor housing.
CAUTION: DO NOT remove rubber gasket on top of the coupling cover.