LET’S BEGIN
We recommend charging Mila when you first receive it to ensure the battery is fully powered.
Follow the instructions in the Stay Powered section to read how.
1
1
2
3
2
3
Use the included USB cord to charge the battery.
To turn the LED lights on, open up the mirror and press the power button located on the left
hand side. The LED lights will shut-off when you close the mirror and automatically come on
again when opened. Mila will power down after 30 minutes if main power hasn’t been switched
off to conserve energy.
To brighten or dim the lights hold down the power button down until you achieve the
desired brightness.
To turn off the light, open the mirror, press the power button and close the mirror. We
recommend you turn the power off when you’re not using Mila to save energy.
TURN IT ON
4
STAY POWERED
When charging the light on the back of Mila will flash red, when fully charged it will flash green.
You will find the Micro USB port located on the left hand side next to the power button.
Attach the USB cord and connect the other end to a power source. The battery takes
approximately 1 hour to fully charge.
