LET’S BEGIN
TURN IT ON
1. Tie or pin your hair away
from your face to avoid it
getting tangled in the device.
2. Select the brush head of
your choice and attach it to
the devices’ head by pushing
it firmly until you hear a click.
3. Dampen skin and brush
head with water (cleansing
with a dry brush head may
cause skin irritation).
4. Apply preferred cleanser to face.
5. Turn ON device and select
suitable speed. Press the
ON/OFF switch ONCE for
gentle cleansing (LOW),
TWICE for deep cleansing
(HIGH), and THREE TIMES to
turn the device off.
6. Gently massage your face in
circular motions with the device
for approximately 60 seconds.
NOTE: Gently glide the brush
over the skin surface. Pressing
too hard will obstruct the
motion, reduce the effective-
ness and could cause irritation.
Avoid contact with eyes and
any areas where the skin is
sensitive, broken or irritated.
7. Press the power button three
times to turn off the device. To
remove the brush head, gently
pull the attached head directly
out, ensuring not to pull at an
angle.
8. Rinse the brush head with water
and let air dry.
