Fanaway EVO1 LED Installation Instructions
7
|
P a g e
L D - 0 0 0 3 - 1 5 / X X X / L E D / 0 1
ELECTRICAL WIRING DIAGRAM
WARNING:
To avoid possible electrical shock, be sure you have turned off the power at the main circuit
panel.
Follow the steps below to connect the fan to your household wiring. Use the wire connecting nuts supplied
with your fan. Secure the connectors with electrical tape. Make sure there are no loose wire strands or
connections.
1. Connect the household live supply wire (black) to receiver input wire (black, AC IN L) as shown in
Fig. 10.
2. Connect the household neutral supply wire (white) to the receiver input wire (white, AC IN N).
3. Connect the household ground wire to the fan bracket ground wire (green) and fan body ground wire.
4. Connect the receiver output wire (black,
TO MOTOR L) to motor live input wire (black,
TO MOTOR L).
5. Connect the receiver output wire (white,
TO MOTOR N) to motor neutral input wire
(white, TO MOTOR N)
6. Connect the LED driver power input
wires and remote receiver power output
wires via the 2-port quick connectors (3);
7. connect the LED driver PWM signal
input wires and remote receiver PWM signal
output wires via the 3-port quick connectors
(2)
8. also connect the LED driver output
wires and LED light wires via the quick
connectors (1)
9. After connecting the wires, spread them
apart so that the green and white wires are
on one side of the outlet box and the black
and blue wires are on the other side.
10. Turn the connecting nuts upward and
push the wiring into the outlet box.
11.
Insert the LED driver into the lower layer
of the mounting bracket, and then insert the
remote receiver into the top layer of the
mounting bracket.
