background image

Fanaway LED EVO1 Installation Instructions 

 

 

 

1 | 

P a g e  

                                          V e r   1 . 1

 

 

 

 

THANK YOU FOR YOUR PURCHASE 

Thank you for purchasing this quality Fanaway product. To ensure correct function and safety, please read and save all 

instructions before using the product. 
 

SAFETY PRECAUTIONS 

1) 

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory 

or  mental  capabilities  or  lack  of  experience  and  knowledge  if  they  have  been  given  supervision  or  instruction 

concerning use of the appliance in a safe  way  and understand the hazards involved. Cleaning and maintenance 

shall not be undertaken by children without supervision. 

2) 

Children should be supervised to ensure that they do not play with the appliance. 

3) 

An all-pole disconnection switch must be incorporated into the fixed wiring, in accordance with local wiring rules. 

AN ISOLATION SWITCH MUST BE INSTALLED WITH THIS FAN. 

This is in accordance with Standard AS/NZS 3000:2007/Amendment 2:2012 Electrical 

installations. Clause 4.13 Motors. 

Please note warranty will be void if installed without an isolation switch. 

 

4) 

Do  not  dispose  of  electrical  appliances  as  unsorted  municipal  waste,  use  separate  collection  facilities. 

Contact  your  local  government for  information  regarding  the  collection  systems  available. If  electrical  appliances 

are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food 

chain, damaging your health and well-being. 

5) 

The structure to which the fan is to be mounted must be capable of supporting a weight of 45kg. 

6) 

The fan should be mounted so that the blades are at least 

2.3

 metres above the floor In Europe. 

7) 

The fan should be mounted so that the blades are at least 

2.1

 metres above the floor In Australia. 

8) 

This fan is suitable for indoor use only. 

9) 

Only an authorized electrician should execute the installation. 

 

 

 

 

 

 

Summary of Contents for LED EVO1












Reviews: