5
Windows PC Driver
Install driver before connection a Porsche Wheel to the PC
You can use the driver of the 911 Turbo or 911 GT3RS which can be downloaded here:
http://www.fanatec.de/html/index.php?id=3114&lang=en
After activating PC Mode (hold BAB 1 second) your windows operating system will detect the
PWTS correctly. You’ll have to install our Porsche Wheel Driver to get full functionality and to
make use of all features. Please keep in mind that most PC games need a controller
customization within the game setup to configure the wheel properly.
The Porsche Wheel driver supports our products: Porsche 911 Turbo
S
Wheel, Porsche 911
Turbo Wheel and Porsche 911 GT3 RS. Within the control panel you’ll find standard features
like vibration-test, Force Feedback-test, centering spring on/off, angle customization,
dampening strength etc. as well as some special features:
Drift mode: For best rally- and drift gameplay (under construction)
Game controlled wheel-display for speed, fuel, etc. (rFactor Plugin)
Wheel vibration for shifting indication, rpm indication, etc. (rFactor Plugin)
Break pedal vibration (with optional Clubsport Pedals) (rFactor Plugin)
The wheel angle adjustment can only be controlled by the driver if the value for sensitivity
within the tuning menu on the wheel is set to “off”! This is important to change sensitivity
within the game.
Supported operating Systems are WinXP 32, WinVista32 and WinVista64
6
Calibration
Wheel center:
After a firmware update is applied a new calibration of the wheel center could be necessary.
To accomplish this….
…bring the wheel into standby or PC mode and turn it to its center position
Press and hold LD1 and LD2 the same time
Press XGB
Release all three buttons
New center position is defined
Summary of Contents for Porsche 911 Turbo S Wheel
Page 9: ......
