ANALOG PADDLE MODES
The CSL Elite Steering Wheel McLaren GT3 has two analog
paddles. With the blue multi-position switch you can
change between modes:
A Clutch bite point**
Left & right paddle work in parallel. The paddle that is
pressed further is valid.
B Han Clutch
Left: handbrake; right: clutch
C Brake + Throttle
Left: brake; right: throttle
D Mappable analog axes
paddles can be mapped as two additional axes
• Press both paddles all the way in. The display will show 100%.
• Release one paddle while keeping the other fully pressed.
The display now shows the percentage value of the released paddle while the
car’s clutch is still fully pressed.
• Set the released paddle to the percentage value where your car’s clutch starts to
bite (evaluate in earlier tests).
• As soon as the virtual start lights turn to green, completely release the fully
pressed paddle and the clutch is immediately at the bite point, held by the other
paddle.
** Clutch bite point feature
(for race start)
In mode A this feature is activated anytime when both paddles are pressed to at least
5%.
ATTACHING THE RIM
Please download and install the latest PC driver and
wheel base firmware before mounting the CSL Elite
Steering Wheel McLaren GT3. You can obtain it at
Fanatec’s website (www.fanatec.com) in the download
section.
As an option for quick attaching and removal
of the wheel you may upgrade to the ClubSport
QuickRelease Adapter (CS QRA), available as an
accessory at www.fanatec.com.
Align wheel base axis to correct
position.
Slide CSL Elite Steering Wheel
McLaren GT3 onto wheel base axis
Use fixing screw
(ISO 4762 M6 x 16mm) and hex key
from the backside of the wheel:
Only use the provided fixing screw.
Push steering wheel
until the screw hole
matches with hole on
wheel base axis.
Turn the steering wheel top side down to see the bottom
side of the clamp ring to follow next step below.
1
2
3
4
Loosen and remove the fixing screw to fix
the clamp ring mechanism.
Use only the hex key from the wheel
compartment.
Proceed in reverse order to remove the
wheel from the base.
5
BUTTON MAPPING
No.
Button
Button no. PC
Xbox One
1
LSB (orange)
12
LSB
2
N (high bezel)
9
VIEW
3
Y (grey)
4
Y
4
X (red)
1
X
5
FunkySwitch
TM
up, down, left,
right, press
Up, down, left, right, press
(26)
up, down, left, right, press
6
RSB (orange)
11
RSB
7
P (high bezel)
10
Menu
8
B (grey)
3
B
9
A (red)
2
A
10
25
Guide
11
Toggle switch R –up/ down
7 / 31
LT (throttle) / RT (brake)
12
Tuning menu
-/-
-/-
13
Toggle switch L – up/ down
8 / 32
LT (throttle) / RT (brake)
14
Paddle mode switch (blue)
See analog paddles modes described in this Quick Guide
15
Shifter paddle L (down)
6
LB
16
Shifter paddle R (up)
5
RB
17
Analog Paddle L
See analog paddles modes described in this Quick Guide
18
Analog Paddle R
5
10
17
18
4
9
3
8
15
16
2
7
1
6
12
14
13
11
IMPORTANT:
Tighten only by using the short lever of
hex key!
IMPORTANT:
Never use without screw!
