1
3
2
TUNING OPTIONS
To enter tuning menu press button
. To navigate inside
the menu, use the D-pad stick:
- Press D-pad up or down to access 5 setups
- Press D-pad right or left to go through the options
and press or hold it up or down to change option values
SHIFTER CALIBRATION
To enter shifter calibration mode, simultaneously press the
two buttons
+
,
highlighted below.
For the detailed process read shifter manual.
CENTER CALIBRATION
If a center calibration is needed (e. g. after firmware update of
wheel base) you need to enter the tuning menu by pressing
button
as shown on the graphic “S_...” will appear on
the display. Now turn the wheel to its center position and
then press two buttons
+
at the same time to calibrate
the wheel center.
To switch between modes simultaneously press and hold the
two buttons + , highlighted below, for one second.
The wheel base LED indicates the active mode:
- Green means Xbox One mode
- Red means PC mode
- Blue means PS4
TM
mode*
- Purple means CSW V2
compatibility mode*
2
25
26
3
4
5
6
9
12
8
10
11
7
1
S_...
1
Press tuning button
2
Turn the wheel to the center
position
3
Press the two buttons
+
at the same time
* not applicable for every Fanatec wheel
base, please check the individual user
manuals of your Fanatec wheel base.
MODES
BUTTON MAPPING
Button
Button no. PC
Xbox One
LT
8
LT 100% (brake)
RT
7
RT 100% (accelerator)
LSB
12
LSB -> LB (shift down)
RSB
11
RSB -> RB (shift up)
10
MENU
9
VIEW
A
2
A
B
3
B
X
1
X
Y
4
Y
Shifter Paddle L
6
LB
Shifter Paddle R
5
RB
D-pad press
26
Horn
D-pad left
D-pad left
D-pad left
D-pad right
D-pad right
D-pad right
D-pad up
D-pad up
D-pad up
D-pad down
D-pad down
D-pad down
25
Guide
