background image

27

27

Endor

®

 AG (“Endor“) or local subsidiaries warrants to the original purchaser that the Fanatec product, which includes 

components contained in the retail box with this product will be free from material defects in material and workmanship 
for a period of one year from the original date of purchase (the “Warranty Period”). This warranty is valid in the country 
where the product was purchased. 

If this product is determined to be materially defective during the warranty 

period, your sole remedy and Endor’s sole and exclusive liability is limited to the repair or replacement of this 

product with a factory-recertified product, at Endor’s option.

 For purposes of this Limited Hardware Warranty and 

Liability, “factory recertified” means a product that has been returned to its original specifications.

       This warranty does not apply if this product
a)  is used with products that are not expressly declared in the product descriptions as compatible with this 

product;

b) 

is used with peripherals Endor does not license, expressly approve or sell. This includes non-licensed 

hardware enhancement devices, controllers, adaptors, and power supply devices (“non-licensed/non-

approved peripherals”);

c) 

is used for any commercial purpose, including rental or arcade purposes;

d) 

is modified or tampered with contrary to the operating and maintenance instructions;

e)  is damaged by the acts of God (natural disasters), negligence, accidents, wear and tear, unreasonable use, 

or by causes unrelated to defective materials or workmanship;

f) 

has the serial number altered, defaced or removed (where applicable);

g)  has the warranty seal altered, defaced or removed (where applicable).

This warranty does not cover consumables (such as batteries) or products sold and clearly marked “AS 

IS” or with faults. Endor may void this warranty if

1) 

Endor reasonably believes that the product has been used in a manner that violates the terms of a separate 

end user agreement for firmware, system software or game software;

2) 

the product is used with non-licensed/non-approved peripherals. Consumer assume all risks and liabilities 

associated with use of third-party products.

This warranty is provided to you in lieu of all other express or implied warranties. This includes warranties 

of merchantability and fitness for a particular purpose for this product, which Endor disclaims under these 

terms. However, if applicable law requires any of these warranties, then they are limited in duration to the 

warranty period.

Except as expressly stated above, Endor excludes all liability for loss of data, loss of profit, or any loss or 

damage suffered by you or any third party, whether those damages are direct, indirect, consequential, special, 

or incidental and however arising under any theory of law, as a result of using this product. Some states or 

provinces do not allow limitations on how long an implied warranty lasts and some states do not allow the 

exclusion or limitations of consequential or incidental damages, so these limitations or exclusions may not 

apply to you.

 This warranty gives you specific legal rights. You may also have other rights which vary from state to 

state or province to province. The warranty offered by Endor on this product is the same whether or not you register 

your product.

This warranty does not apply to any system software / firmware that is pre-installed in the purchased product, or is 

subsequently provided via update or upgrade releases. In case of issues apparently related to system software / 

firmware as well as any other product related issues, Endor recommends checking the FAQ database at 

fanatec.com/

support/faq

 to see if your problem can be solved there.

WARRANTY

13

Summary of Contents for CSL DD

































Reviews: