18
After mechanical adjustment of the FunkySwitch
TM
you need
to make sure that the arrow is located on the top side. If this
is not the case you can loosen the small worm bolts and turn
the FunkySwitch
TM
. Tighten the worm bolts again after adjust-
ing the arrow position.
The button boxes can be mounted to short or long levers and on each of the
three sides of the button box.
When the button boxes are adjusted to your favourite positions and orientation
you can pull off the button caps from the buttons and re-attach them onto the
buttons well orientated and aligned.
Electrical
The FunkySwitch
TM
needs to be plugged in at long socket labelled (ENCOD
-
ER1). Connect the plug of the button box cable to any of the remaining 5 plugs
on the PCB labelled BUT_2 to BUT_6.
Summary of Contents for ClubSport Universal Hub For Xbox One
Page 1: ...Manual www fanatec com ...
