6. Square position
i
IMPORTANT: Verify that the diagonals had the same lenght, placing the bottom rail about 30 cm far
from the hooking device.
With direct fixing:
- set the guides definitively
With adjustable guide track spacer:
- tighten the wall support screws and
the guide
spacer screws
adjustable
2mm
T.30
12
FANANI / ASSEMBLY INSTRUCTIONS
Windbreak profile .7
21
6
=
=
1) insert the stainless steel holding plate into the
guide ;
2) set the wind-break profile supports in the holding
plates at the desired position;
3) link the wind-break profile to the holding plate
with screws.
T.30
13
FANANI / ASSEMBLY INSTRUCTIONS
2mm
2mm
ATTENTION : a wrong alignment of the side guides or a their unstable settings cause the malfunction of
the myShell blocking system
YES
Ideal condition
NO
Condition to be corrected
NO
Condition to be corrected
