60
″
TightenUp
Pull
Press
Wind
3.5 Remove Odor:
Method 1:
Click "Remove Odor" on the panel or click "Odorless" on the App.
Method 2:
Set regular work on your App. 3.6 Replace Garbage Bag: When indicator "Full" is on,
you will need to replace the garbage bag.
Notice:
①
The device will remove odor automatically for 30 minutes after every cleaning.
②
It will stop once the cat enters and continue to work after the cat leaves.
3.6 Replace Garbage Bag:
When indicator "Full" is on, you will need to replace the garbage bag.
EN
EN
19
20
①
Hold the "Clean"
button for 2 seconds, wait
for the waste bin to
change the position,
open the waste bin and
t a k e o u t t h e u s e d
garbage bag.
②
It will take 60 seconds
to change the waste bin
position. Then, the device
automatically returns after
60 seconds. If the new
garbage bag is not
placed within 60seconds,
you can continue after the
device is returned.
③
The drawstring of the
new garbage bag is
aligned with the tie uppile
and the lower edge of the
bag opening is clamped
under the locating clip.
④
Wrap the garbage bag
around the outer frame of
the waste bin gate, and
pull out the drawstring.
⑤
Press the drawstring
into the tie-up pile,
tighten and wind it.
ii
⑥
After the installation,
confirm that the automat-
ic flip-door of the waste
bin is not blocked and
can open and close
normally. Place the rest
part of the garbage bag
to the empty room of the
waste bin, to prevent it
being trapped by the
wastebincover.
LocatingClip
Winding
