EN
EN
05
06
1.4 Adding Litter:
Make sure the leveled litter height is between the MAX line and the MIN line (based
on your actual need).
1.5.1 Power on the device with pluging in the adapter and wait for the machine to
self-check for about 3-8 minutes. It will automatically enter the sensing stage after
self-check. No need to change its mode at this point.
1.5.2 After the cat litters and leaves, the device will automatically clean up in 3 minutes to
allow enough time for the cat leaves and cat excrement clumps. Then the cleaning
process will take 4 minutes to complete.
1.5.3 After cleaning, the device will automatically start the smell elimination and disinfec-
tion process which will last around 30 minutes.
Notice:
×
Pick up or drag the device after powering up. (This will interfere with weight calibration in
the reset program.)
①
If you place the device in a narrow space, or there is an infrared interference source in
front of the device, the device self-check may take about 8 minutes. Please wait patiently.
②
Suppose the sensor has detected the space is not suitable for work. In that case, the
detection function will be automatically disabled after the self-check is completed. The
weight detection system will detect whether the cat enters automatically.
③
During the cleaning process, all keys will be suspended. Please wait until the cleaning pro-
cess is completed if you need the device to perform other functions.
MAX Line
The amount of cat litter should
not exceed Max line.
MIN Line
The amount of cat litter should
not be lower than Min line.
1.5 Power On:
