FAMOCO FX200, User Manual

Page: 14 / 30

13
2. Place the center of the device’s back on the center of the wireless
charger.
3. Your device should start charging a few seconds after you place it
on your wireless charger (the led will indicate if the device is
charging)
4. After the device is fully charged, remove the device from the
wireless charger.
Note:
- Your device might get warmer while it charges. If the battery gets
too warm during charging remove the device from the charger.
Charge again when the device temperature drops. Alternatively
move the device to a cooler location.
Precautions for wireless charging
- The actual charging time may vary depending on the charging
conditions.
- Do not place the device on the wireless charger with a credit card
or radio- frequency identification (RFID) card (such as a
transportation card or a key card) placed between the back of the
device and the device cover.
- Do not place the device on the wireless charger when conductive
materials, such as metal objects and magnets, are placed between
the device and the wireless charger. The device may not charge
properly or may overheat, or the device and the cards may be
damaged.
- If you use the wireless charger in areas with weak network signals,
you may lose network reception.