FAMOCO FX105, User Manual, Page: 14 / 24

8.8 How to change the battery
1. Unclip the back-left corner where the little nook is and from this angle,
remove the back cover.
2. Use the small nook on the bottom to remove the battery.
3. Insert the new battery with the pins located against the gold
springs (with the label up).
4. Press the battery down into the case.
5. To replace the back cover, reverse step 1 and push gently to close.
8.9 How to use the battery
Charge the battery promptly when empty. Do not leave the battery in a
discharged state.
Keep your device and battery cool. High temperatures degrade the battery
more quickly. The battery will not charge when over 45°C.
In order to prevent an accelerated degradation of the battery, do not leave
on charge for more than 10 hours.
When not using the device for long periods, charge to approximately 40%
and remove the battery.
8.10 How to read an NFC card
To read an NFC card, flip the device over and bring the card near the back of
the device.
The device can read an NFC card at less than 3cm.
Device can read/write read/write NFC forum tags 1,2,3,4, Type MIFARE
Classic Tag (full Mifare-ultralight/1k/4k)
13