The drain tube may be extended
by adding an extension tube and
using a suitable connector.
Drain tube
FIG.18
Please note
1.
The drain must be at or below
the outlet level.
2.
Flashing comp / ‘full water’
indicator will not function in this
mode of drainage.
3. If you want to extend the water
tube, you can connect it with
another tube (OD: 18mm)
Extended drain tube(OD: 18mm)
Original drain tube
FIG.19
Special caution for heating function !
While using the heating function,
please note:
1. Install the exhaust pipe well, in
order to exhaust the cool air to
outdoor. (Please refer to the
instruction manual for installation
method.)
2. Fix the drainage to be continuous
one (i.e. drain the water by water
tube).
3.
Working range for heating
function is 7 to 25
o
C (for cooling
function, it is 18 to 32
o
C). For
temperature outside this range,
the unit may not work properly.
FIG.20
