-7-
1) Soap opening
2) Upper sensor
3) Lower sensor
4) Soap container lid
5)
of soap
: Increase amount
6)
switch off output
Button –: Reduce amount of soap,
7) Display screen
8) Battery compartment
5.1 Display screen
3
2
1
1) Volume of soap output
2) Soap level indicator
3) Battery life indicator
6. Insert Batteries
Unscrew the two screws on the bottom of the soap dispenser with a phillips
screwdriver to open the battery compartment cover.
Insert the three batteries into the battery compartment with the correct
polarity. Pay attention to the instructions in the battery compartment.
-8-
Close the battery compartment cover and secure it with the screws.
Remove the battery status of the display:
Four bars: battery has full power
One bar: change batteries.
7. Filling soap dispenser
Flip open the soap container lid.
Remove the cap from the soap holder.
Rinse the soap container with clear
water before first use and when
changing the care product.
Fill the soap holder with the desired
care product. Do not overfill the
container.
Put the cap on the soap container.
Flip closed the soap container lid.
8. Installing/assembling soap dispenser
Set the soap dispenser on a flat, stable surface or mount it on the wall.
HAZARD!
Electric shock hazard.
There is a risk of electric shock from hidden live cables.
Make sure during installation that no electric lines are in
the wall.
Use a cable detector if necessary.
Using the slots on the back, the soap dispenser can be fastened to the wall.
Select an appropriate position.
Drill two holes underneath one another at a distance of 7 cm.
Insert two dowels.
Screw in two suitable screws and let the screw heads protrude slightly.
You can now hang the soap dispenser onto the screw heads.