10
icon with the same frequency, and alarm …be.be…be.be… 5 times. If you did not
replace the battery, the same alarm will appear after 5 minutes. If still low power, the
unit will alarm every 5 minutes. 5 times later, both units will off.
•
Press and hold the left talk button of parent unit, release the button after talk
•
Press the volume up/down button of parent unit to adjust the volume
•
When the parent unit is low power, the baby unit does not reflect any. The empty
battery power icon will flash with the frequency of 1 second, and alarm…be.be…
be.be…5 times. If you did not replace the battery, the same alarm will appear after
5 minutes. If still low power, the unit will alarm every 5 minutes. 5 times later,the par-
ent unit will off.
•
When the parent unit is beyond the effective distance range, the signal confirma-
tion icon will flash with the frequency of 1 second and alarm with sound be.be…
be...be…for 5 times and repeat after 5minutes,if not receive any signal,it will repeat
sounding in every 5 minutes,then parent unit power off.
•
When no signal , the unit will alarm …be…be…be
•
When low power, the unit will alarm…be.be…be.be…
•
Use battery for power supply, when the battery power is too low,it will display blank
battery symbol after switch on and the backlight disappear after 3 seconds,,when
the power very low,can’t switch on.
9. Specifications
Baby unit
Model
FDBB-V2 (Baby unit)
Power supply
9V DC/350mA adapter or 3x1.5V AA batteries
Standby current
≤120mAh
Module used Frequency range
2410-2473MHz
Module used Channels
64 Channels
Barrier-free transmission distance 300m (clear)
Low Power Indication
Battery icon flashes lower than 3.6V(3.6V±2%)
Operation Condition
10-38°C(50-100.4°F) ≤80%RH
Storage Condition
-25-55°C(-13-131°F) ≤95%RH
ambient temperature
10~38°C
Size
109.5(L)X108(W)X67.7(D)mm
Weight
135g±5%
