Fametech PPD 3000, User Manual

Page: 4 / 25

ii
TRADE MARKS AND SERVICE MARKS
TYSSO is a registered trademark of FAMETECH INC.
Other brand and product names are trademarks and registered trademarks and service marks
of their respective owners.
IMPORTANT SAFETY INFORMATION

Read all these instructions carefully.

Use only parts, especially power adapter, recommended by the manufacturer; unapproved
parts may be hazardous.

Before plugging the power cord into the AC inlet of the power supply unit, make sure that
the voltage applied to the power outlet is within the specified range (100V ~240V).
Improper power source voltage range will cause damage to the power supply unit.

Power off the PPD and remove the power adapter while cleaning the monitor.

Keep the PPDs away from water, direct sunlight, a heating or a radiator.

Do not place the PPD on an unstable cart, stand or table. If the machine falls, it may injure
people or cause serious damage to the appliance.

The PPD is equipped with a three-wire grounded plug with a third (grounding) pin. This is a
safety feature. If your outlet does not accommodate the three-wire plug, have an electrician
install a correct outlet, or use an adapter to ground the appliance safely. Do not leave out
the safety purpose of the grounded plug.

Do not allow anything to rest on the power cord. Do not locate the system where people
may walk on the cord.

Do not make the power outlet and extension cords overload. Overload can result in fire or
electric shock.

Do not push any object into the monitor cabinet. Dangerous voltage points may be touched
and the parts may be shorted out resulting in fire or electric shock.

Do not attempt to service the PPD on your own. Opening or removing cover can expose
you to dangerous voltage or other hazards.

Power off the monitor before installing or removing non-PNP (plug and play) devices.

If any of the following situations occurs, unplug the PPD from the power outlet immediately
and consult with a qualified service person:
1. The power cord or plug is damaged or frayed.
2. Liquid is spilled into the PPD.
3. The PPDs are dropped or the cabinet is damaged.

When the PPD is not in use, cover the PPD and store it with care.