- 19 -
TIP:
Replace a New Hard Disk to the HDD Bracket
1.
Loosen the securing screws to remove the
hard disk from the bracket.
Then replace a new hard disk.
2.
Secure a new hard disk drive (HDD) to the
HDD Bracket.
3.
Re-install the HDD Module (with new HDD)
back to the POS terminal.
Note:
DO NOT push the HDD Module with force.
If the HDD Module cannot be installed back to the Hard Disk Drive Slot, it might be in the
wrong direction when secure the HDD onto bracket.
Consult the technical personnel and re-assemble the HDD Module properly.
HDD Bracket
Securing Screws
X 4
