7
Controls and Switches
We suggest you start exploring the channels with all controls set to 12 o‘clock
and the master volume slightly cracked open.
CHANNEL 1
Gain
This knob controls the preamp level in Channel 1.
It works very effective, so you should be very careful
using it.
Volume
This controls the overall volume of Channel 1.
Bass & Treble
These controls are responsible for the overall sound
of the fi rst channel. Bass adjusts the lower frequencies
while Treble will decrease or increase the level of high
frequencies.
I & II
This switch changes between Channel 1 and
Channel 2.
CHANNEL 2
Gain
This knob controls the amount of distortion in
Channel 2. Turn it clockwise to increase the amount of
gain or counter-clockwise to decrease it.
Volume
Controls the overall volume in the second channel of
the T64RS.
Bass, Middle, Treble
These three knobs control the overall sound of
Channel 2. They do not affect each other.
REVERB
This controls the rate of reverb in the overall sound
of the amplifi er. It is recommended to adjust from the
lowest setting and slowly turn the knob to the desired
amount.
MAINS
This switches the T64RS on or off.
Summary of Contents for T64RS
Page 1: ...ELECTRIC GUITAR AMP Owner s Manual T64RS...
Page 10: ...T64RS 2007...
