6
Setting Up the Kick trigger:
We suggest you to mount the Kick-Trigger on the top side of your kick
drum. In the Kick trigger box there is a rubber washer. Use this washer
for thin styled Kick hoops. Put the washer between the hoop inside and
the holder legs of the kick trigger before lightly tightening the trigger to
the hoop.
Do not over tighten!
The reason for using the rubber washer is to get the actual sensor further
in towards the center resulting in a better controlled triggering.
Because Kick hoops differ in size the Fame Pro Kick Trigger has a
mounting screw that can be moved up and down in its groove, making it
possible to find the optimal mounting position. Contrary to the Tom
mounting you might need to apply some pressure to the sensor onto the
head to fix the Kick trigger to the hoop.
