Important safety instructions! Please read before connection!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
√
ATTENTION:
To prevent the risk of electric shock, do
not open the unit under any circumstances.
Refer all maintenance and repair work to a qualified
workshop or contact your dealer.
The lightning flash symbol warns the user
of uninsulated voltage and the risk of
electric shock.
The exclamation point symbol alerts the
user to important maintenance and
operating instructions in the instruction
manual.
Suitable for indoor use only
Read operating instructions
This symbol defines the minimum distance
of the object to be illuminated.
For environmental reasons, please recycle the
packaging correctly.
A new product can sometimes lead to unwanted odours
or to minimal smoke development for a short period of
time. This reaction is normal and disappears after a few
minutes.
The unit is intended for indoor use only (IP20)! Please
use the device only in a dry environment. Keep the unit
away from rain, moisture, direct heat and dust.
In order to avoid condensation in the device, the device
should adapt to the ambient temperature before start-
up.
Please place the device in a well ventilated place, out of
the reach of flammable materials or liquids.
Do not cover any ventilation openings as this may
result in overheating.
Please disconnect the power plug if the unit is not to be
used for a long period of time or if maintenance work is
to be carried out.
The device is designed for a maximum ambient
temperature of 40° Celsius.
The device should not be installed by inexperienced
persons and must be installed in compliance with the
mechanical and electrical safety regulations in your
country.
If the power cord is damaged, it must be replaced
immediately with an original spare part from the
manufacturer.
Make sure that the mains voltage is not higher than the
voltage indicated on the housing.
In case of a malfunction of the device, please contact your
dealer and stop the operation of the device immediately.
