background image

6

Controls & Switches

ADVICE!

We recommend you start adjusting the equalization at the 12 o‘clock
position and slowly turn to the knobs until you reached the desired setting.

CHANNEL 1

Gain

Controls the preamp‘s intensity in the fi rst channel of 
the GX60R.

Volume

This knob is responsible for the master volume of 
Channel 1.

Bass, Treble

These two knobs represent the overall equalization 
for the GX60R‘s fi rst channel. While Bass controls 
the amount of low frequencies, Treble will adjust the 
amount of high frequencies in this channel.

CH I & CH II

Switches between the two channels of the amplifi er.

CHANNEL 2

Gain

Controls the amount of distortion in the second
channel. The range goes from bluesy overdrive sound 
up to high gain distortion.

Volume

Controls the overall volume of Channel 2.

Bass, Middle, Treble

These knobs are responsible for the overall sound 
in this channel. Bass controls the amount of low
frequencies, while Middle and Treble will adjust the 
mid and high frequencies.

Reverb

This knob adjusts the intensity of Reverb (Hall) in 
the overall sound of the amplifi er. Turning the knob
clockwise will higher the amount of reverb and
otherwise.

Power

Switches the GX60R on or off.

Summary of Contents for GX60R










Reviews: