6
ENGLISH
Charging:
1.
When charging the Voltor 8 for the first time, we advise to charge for 12 hours.
Each subsequent charge will take between 5-7 hours
2.
The Voltor 8 can be charged with either the supplied AC adapter or via an appropriate
Micro USB cable and and power source.
3.
The power level display shows you the level of charging of the Voltor 8.
While charging the display will blink.
Operation:
All connections of the device should be made before switching on. Use only high-quality cables
that are as short as possible for the connections.
1.
Connect your 9V effect pedals to the 8 9V DC connectors with the supplied dc-cables
2.
Turn on the Voltor 8 with the ON/OFF button
3.
With the supplied Y-split cabels two 9V outputs can be combined. That way an 18V effect
pedal can be powered.
Important:
Please check the polarity and needed voltages of effect pedals before connecting
them tot he Voltor 8.
Specifications:
Troubleshooting:
The following overview is intended as an aid to rapid troubleshooting. If you are unsure,
contact the manufacturer, the dealer or appropriate specialist personnel. Never open the
device by yourself!
DC8
Power input
12V DC 2000mA (-) innen Adapter oder
5V 1A/2A via Micro USB
Power output
6x 9V DC 300mA, 2x 9V 500mA, jeweils
negativr Innenleiter, (-) innen
Size
141 x 69 x 32 mm
Battery capacity
8000mAh, 3,7V
Weight
620 g
