Putting into operation:
All connections of the device should be made before switching on. Only use high-quality cables that
are as short as possible for the connections.
DEUTSCH
ENGLISH
Installation:
Be sure to inspect the product for damage before using it. Optimally, use the original packaging or
suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in
use.
1
BYPASS foot switch
Used to switch on/off the effects unit.
2
DC IN connection
For connecting a power supply DC 9V (-) inside
3
Input
Input jack for standard instrument cable (6.3mm mono jack)
4
Output
Output jack for a standard instrument cable (6.3mm mono jack)
5
Level controller/Status
LED
Determines the level of the output signal and indicates whether
the effect is on or off.
6
5-band sound control
Determines the gain/reduction of the individual frequency bands.