DEUTSCH
ENGLISH
Putting into operation:
All connections of the device should be made before switching on. Only use high-quality cables that
are as short as possible for the connections.
Installation:
Be sure to inspect the product for damage before using it. Optimally, use the original packaging or
suitable transport or storage packaging to protect the product from dust, moisture, etc. when not in
use.
1
BYPASS foot switch
Used to switch on/off the effects unit.
2
LED
Displays pedal status
3
RATE controller
Sets the tempo of the effect
4
DEPTH controller
Determines the effect depth of the effect.
5
LEVEL controller
Controls the volume of the effect
6
Input
Input jack for standard instrument cable (6.3mm mono jack)
7
Output
With a standard instrument cable, you can connect to these
output another effects pedal or your amplifier
connect
8
DC IN connection
For connecting a power supply DC 9V (-) inside