Important safety instructions! Please read before connection!
DANGER! (Electrical shock due to high voltages in the device)
The housing must not be removed! There are
no
parts to be maintained in the de-
vice. Inside the unit there are components which are under high electrical voltage.
Before each use, check the device for damage or the absence of components, pro-
tective devices or housing parts. If this is the case, the device must not be used!
Leave maintenance and repair work to a qualified service workshop or contact
your dealer. In the case of a malfunction of the device, operation must also be
stopped immediately until the device has been repaired by a specialist!
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is
damaged, it must be replaced immediately with an original spare part from the
manufacturer.
Always make sure that the grounding of the device is maintained. Only use the
supplied power cables and always maintain the earthed protective contacts on the
side. Make sure that the sockets used have a properly functioning protective earth.
Failure to do so may result in fire or death due to electric shock!
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be
kept out of the reach of babies and children due to the risk of suffocation.
Ensure that children never use the appliance unattended! In addition, make sure
that children do not remove (small) parts from the device, as they could suffocate
by swallowing parts!
DANGER! (Hearing damage)
Professional speaker systems are able to generate harmful sound levels. Even the
influence of seemingly harmless sound levels over a longer period of time can lead
to permanent damage to the hearing (from approx. 95 dBA SPL).
Therefore, always wear professional hearing protection (earplugs or capsule ear
protectors) during operation!
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is
40°C
.
Ensure that the unit is placed in a well-ventilated location away from direct heat
sources, naked flames, combustible materials, and liquids. A minimum distance of
1 m is required.
Do not tape or cover the ventilation slots of the unit, or insert objects into the
unit.
DEUTSCH
ENGLISH
Summary of Contents for MT Series
Page 31: ......