33
ENGL
ISH
CAUTION
• Never use the pressure washer to draw in water contaminated with solvents (e.g.
paint thinners, gasoline, oil, etc.).
• Dirt in the water inlet will damage the unit. To avoid this risk, we recommend
checking the water filter (located inside the water inlet. To clean it out see
Maintenance section).
• Always prevent debris from being drawn into the unit by using a clean water source
and an additional accessory water filter if required.
• To prolong the life of the unit, rest the unit for 5 minutes after every 30 min of use.
Connect the metal lance to the gun, and
fix it by turning the socket clockwise.
Connect the tip of jet you prefer in the
lance. To do this, pull the tip of the lance
against itself and insert the tip jet, then
release both parts.
Make sure the tip of the lance returned to
its original position, if not, push it toward
the tip jet for it to return.
3
5
4
6
Insert the filter in the water inlet of the
washer.
Attach the cranks on the
side of the washer.
Insert the tip of the hose connection
to assemble with the gun and turn the
socket to fix both parts.
1
2
