18
mAINTENANcE
Before cleaning or carrying out maintenance operations, disconnect the
equipment by removing the plug or switching of the main switch.
Do not use detergents containing abrasive, acidic or corrosive substances
or abrasive cloths.
Regular maintenance guarantees proper operation and performance over time.
Special attention is to be paid to the metal anti-grease ilters and active carbon ilters: fre-
quent cleaning of the ilters and their supports ensures that no lammable grease is accu-
mulated.
cLEANINg OF ExTERNAL SURFAcES
You are advised to clean the external surfaces of the hood
at least once every 15 days
to
prevent oily substances and grease from sticking to them. To clean the brushed stainless
steel hood, the Manufacturer recommends using "Magic Steel" wipes. Alternatively, it can be
cleaned using a damp cloth, slightly moistened with neutral, liquid detergent or denatured
alcohol. Finish of cleaning by rinsing well and drying with soft cloths.
Do not use too much water next to the push button control panel and
lighting devices in order to prevent humidity from reaching electronic
parts.
The glass panels can only be cleaned with speciic, non-corrosive or non-abrasive detergen-
ts using a soft cloth.
The Manufacturer declines all responsibility for failure to comply with these instructions.
cLEANINg OF INTERNAL SURFAcES
It is forbidden to clean electrical parts, or parts related to the motor inside
the hood, with liquids or solvents.
For the internal metal parts, see the previous paragraph.
mETAL ANTI-gREASE FILTERS
It is advised to
frequently
was the metal ilters (
at least once a month
) leaving them to
soak in boiling water and washing up liquid for 1 hour, taking care not to bend them.
Do not use corrosive, acid or alkaline detergents.
Rinse them well and wait for them to be completely dry before reassembling them. Washing
in a dishwasher is permitted, however, it may cause the ilter material to darken: to reduce
the possibility of this problem from happening, use low-temperature washes (55°C max.).
The metal anti-grease ilters on the PRO line can be washed in the dishwasher.
To extract and insert the metal anti-grease ilters see the assembly instructions.
HP/AcTIvE cARBON FILTERS (optional)
These ilters retain the odours in the air that passes through them. The puriied air is recircu-
lated into the environment.
The HP active carbon ilters
reactivate
by washing them in the dishwasher with a normal
detergent at a maximum temperature of 65°C and passing them in the oven at 100°C for
10 minutes.
The maximum duration of the ilter is 2/3 years with a maximum of 10 washings per year.
DISPOSAL AFTER END OF USEFUL LIFE
The crossed-out trash or refuse bin symbol on the appliance means that
the product is
WEEE
, i.e.
“
Waste electrical and electronic equipment'', accordingly
it must not be dis-
posed of with regular unsorted waste
(i.e. with ''mixed household waste''), but it must be
disposed of separately so that it can undergo speciic processing for its re-use, or a speciic
treatment, to remove and safely dispose of any substances that may be harmful to the envi-
ronment and remove the raw materials that can be recycled. Proper disposal of these prod-
ucts contributes to saving valuable resources and avoid potential negative efects on per-
sonal health and the environment, which may be caused by inappropriate disposal of waste.
You are kindly asked to contact your local authorities for further information regarding the
designated waste collection points nearest to you. Penalties for improper disposal of such
waste can be applied in compliance with national regulations.
INFORmATION ON DISPOSAL IN EUROPEAN UNION cOUNTRIES
The EU WEEE Directive was implemented diferently in each country, accordingly, if you wish
to dispose of this appliance we suggest contacting your local authorities or dealer to ind
out what the correct method of disposal is.
INFORmATION ON DISPOSAL IN NON-EUROPEAN UNION cOUNTRIES
The crossed-out trash or refuse bin symbol is only valid in the European Union: if you wish
to dispose of this appliance in other countries, we suggest contacting your local authorities
or dealer to ind out what the correct method of disposal is.
WARNINg!
The Manufacturer reserves the right to make changes to the equipment at any time and
without prior notice. Printing, translation and reproduction, even partial, of this manual are
bound by the Manufacturer's authorisation.
Technical information, graphic representations and speciications in this manual are for in-
formation purposes and cannot be divulged.
This manual is written in Italian. The Manufacturer is not responsible for any transcription
or translation errors.
