8.0 Labels
The labels must be present and legible.
MCS05 Rev A
121619
16
REV
TITLE
ITEM NO.
SIZE
SHEET
SCALE
Label, 85'/120' Cable DuraTech
SRL-R, Back/Warning
412-04000
REVISIONS
REV
DRAWN
DATE
P1 PRELIMINARY INITIAL RELEASE
DESCRIPTION
9-25-19
Sam
A PRELIMINARY INITIAL RELEASE
10-14-19 Sam
THE INFORMATION EMBODIED IN THIS DOCUMENT IS STRICTLY
CONFIDENTIAL AND ARE SUPPLIED WITH THE UNDERSTANDING
THAT THEY WILL NOT BE DISCLOSED TO THIRD PARTIES
1:1
1/1
A
A
WEIGHT (FOR REFERENCE ONLY)
N/A
N/A
N/A
Samuel ANdrade
N/A
N/A
N/A
polycarbonate coated vinly
APPLICABLE STANDARDS:
ASME Y14.5-2009 & DIN ISO 2768
EXCEPTION: TRAILING ZEROS DENOTE
TOLERANCE
UNLESS OTHERWISE SPECIFIED DIMENSIONS
ARE IN MILLIMETERS (mm)
TOLERANCES ARE:
0 to 6 ...........................................
6 to 30 .........................................
30 to 120 .....................................
120 + ...........................................
ANGLES .....................................
APPROVED
MFG
CHECKED
SURFACE ROUGHNESS
SURFACE FINISH
9-25-19
MATERIAL
DRAWN
N/A
N/A
N/A
0.1
0.2
0.3
0.5
0.5
105mm
105mm
10mm
40mm
DIE CUT LINES
Read and follow instructions
supplied with the product at time of
shipment. Inspect the visual indicator. Do not attach in a manner that
could side-load the gate. Remove the unit from service immediately if it is
subjected to fall arrest or equivalent forces.
See instruction manual for important information regarding fall clearance
requirements and swing fall. This unit is not suitable for horizontal use nor
for horizontal lifeline applications. Swing fall is not permitted when using this device. This unit is for use
with an overhead anchorage only. Avoid contact with sharp edges and abrasive surfaces. Read and
understand the manufacturer's user instruction manual, including labels and warnings,before using this
product. See manufacturer's user instruction manual for complete inspection procedures.
Inspect the unit before each use. Ensure locking system
functions correctly by pulling sharply on the lifeline. The lifeline
must lock. Ensure connecting hardware functions normally. See user instructional manual
for information regarding lifeline operational length and end of lifeline reserve.
Class B arrest distance less than 54”
Avg. arrest force less than 900lbs.
Max free fall: 2’
Class: B 3/16” CABLE: Galvanized steel Stainless steel
Length:85ft
Inspect before each use. Refer to instruction manual for proper installation and use.
Capacity: 130lbs to 310lbs, include tools, clothing, etc.
Dual-Mode SRL-R Unit Rescue/Retrieval Operation Instructions
1)
Unfold black collapsible handle. Hand crank assembly should now rotate freely in both directions while
in the self-retracting “Fall Arrest” mode. (Hand crank assembly will be extended out from the SRL-R
unit body)
2)
To convert SRL-R to “Rescue/Retrieval” mode, pull out crank engagement pin while
depressing hand crank assembly into unit.
3)
Release crank engagement pin while keeping pressure on
hand crank assembly.
4)
Rotate hand crank assembly clockwise to engage rescue/retrieval mechanism;
crank engagement pin should be fully retracted into the SRL-R body.
5)
To raise personnel, rotate handle
counter-clockwise. To lower personnel, rotate handle clockwise.To convert SRL-R to “Fall Arrest” mode, pull
out crank engagement pin while pulling the hand crank assembly away from the SRL-R body, then
release knob.
Part # / DOM
Serial #
Length:120ft
If red load
indicator
band is
visable
do not
use
ANSI Z359.14 - 2014 compliant
412
-04
000
Re
v A
Read and follow instructions
supplied with the product at time of
shipment. Inspect the visual indicator. Do not attach in a manner that
could side-load the gate. Remove the unit from service immediately if it is
subjected to fall arrest or equivalent forces.
See instruction manual for important information regarding fall clearance
requirements and swing fall. This unit is not suitable for horizontal use nor
for horizontal lifeline applications. Swing fall is not permitted when using this device. This unit is for use
with an overhead anchorage only. Avoid contact with sharp edges and abrasive surfaces. Read and
understand the manufacturer's user instruction manual, including labels and warnings,before using this
product. See manufacturer's user instruction manual for complete inspection procedures.
Inspect the unit before each use. Ensure locking system
functions correctly by pulling sharply on the lifeline. The lifeline
must lock. Ensure connecting hardware functions normally. See user instructional manual
for information regarding lifeline operational length and end of lifeline reserve.
Class B arrest distance less than 54”
Avg. arrest force less than 900lbs.
Max free fall: 2’
Class: B 3/16” CABLE: Galvanized steel Stainless steel
Length:85ft
Inspect before each use. Refer to instruction manual for proper installation and use.
Capacity: 130lbs to 310lbs, include tools, clothing, etc.
Dual-Mode SRL-R Unit Rescue/Retrieval Operation Instructions
1)
Unfold black collapsible handle. Hand crank assembly should now rotate freely in both directions while
in the self-retracting “Fall Arrest” mode. (Hand crank assembly will be extended out from the SRL-R
unit body)
2)
To convert SRL-R to “Rescue/Retrieval” mode, pull out crank engagement pin while
depressing hand crank assembly into unit.
3)
Release crank engagement pin while keeping pressure on
hand crank assembly.
4)
Rotate hand crank assembly clockwise to engage rescue/retrieval mechanism;
crank engagement pin should be fully retracted into the SRL-R body.
5)
To raise personnel, rotate handle
counter-clockwise. To lower personnel, rotate handle clockwise.To convert SRL-R to “Fall Arrest” mode, pull
out crank engagement pin while pulling the hand crank assembly away from the SRL-R body, then
release knob.
Part # / DOM
Serial #
Length:120ft
If red load
indicator
band is
visable
do not
use
ANSI Z359.14 - 2014 compliant
412
-04
000
Re
v A
PANTONE 152C
PANTONE 109C
PANTONE 485C
CUT OUT
DIE CUT LINES