IMPORTANT
All persons using this equipment must read and understand all instructions. Failure to
do so may result in serious injury or death. Users should be familiar with pertinent
regulations governing this equipment. All individuals who use this product must be
correctly instructed on how to use this device.
This product is to be used by qualified fall protection personnel only. It is to be
anchored in accordance with manufacturer’s requirements in a steel beam or concrete
substrate only. The Precast concrete must have a compressive strength of at least
6,000 PSI. Do not anchor in uncured/wet concrete.
Model #7442 is color coded with BRIGHT BLUE TUBING on the attachment loop. It is to
be used for FALL PROTECTION ONLY. This unit is not to be used for hoisting or
lowering tools, personnel, or material.
The Toggle Lok anchor may be mounted on horizontal surfaces, vertical surfaces, and
overhead/ceiling surfaces.
If a previously drilled hole is to be used, inspect it carefully and ensure it is of the correct
size and location.
Ensure the Toggle Bar is activated in the deployed position before placing a load on the
anchor. See Figure 1.
The ToggleLok is designed to flex under impact loads. Do not allow any object to fall
onto the ToggleLok. Do not allow the Anchor Loop or the Main Cable to become kinked
or deformed.
The ToggleLok has been carefully designed and manufactured of the highest quality
materials to ensure a long trouble-free service life. See Figure 1.
APPLICATIONS
The ToggleLok is designed as an easily installed, precisely located fall protection
anchor point that may be used, uninstalled and reinstalled in a different location. This
device is suitable for use in 6 in. or larger hollowcore concrete structures, with 1 ½ in. to
4 in. precast concrete, and with ¼ in. to 4 in. thick steel flanges.
