5.4 Device Bracket Removal and Installation
Remove the three bolts to remove the bracket. To install, align the three holes in the bracket with the SRL-R housing and torque the bolts
to 19 ft-lbs (26 Nm); see Figure 10.
Figure 10 - Bracket Removal/Installation
MCS05 Rev A
121619
9
5.3 SRL-R Bracket Install onto a FallTech Universal Device Receiver Bracket
1.
Remove the top detent pin from the FallTech Universal Device Receiver Bracket.
2.
Place the notch in the SRL-R bracket over the bottom bar of the FallTech Universal Device Receiver Bracket as shown in Figure 6.
3.
Rotate the SRL-R bracket to align the upper holes as shown in Figure 7.
4.
Insert the provided detent pin ensuring it goes through both sides of the bracket as shown in Figure 8.
Please see FallTech user manuals for instructions and requirements; MCS30 for the Davit System, MCS01 for the 11’ Tripod, and MCS06 for
the 8’ Tripod.
Figure 6
Figure 78
Figure 8
