40
»Car System 2« software
EN
6.
»Car System 2« software
»Car System 2« software is a program that helps you install your modules.
That software allows you to assign easily module numbers, digital addresses
and checkback numbers by means of its graphical user interface.
NOTICE
When starting the software for the first time, only the PC-standard module
should be connected to the computer as that software identifies any addi-
tional module as being new and assigns serial numbers to the modules.
Should previously several modules be connected already, that automa-
tism might result in contradictory data being stored.
X
Disconnect any existing LocoNet connections.
X
Make sure the basic module is supplied with the right voltage.
X
Connect the USB socket of the module to the computer.
X
Start the software.
ADVICE:
X
As a rule the PC-standard module and the interfaces used are automa-
tically identified. Should such procedure not function properly, change
the COM port in the selection proposed. Should the window to be used
to change the port not automatically open, you can open it under menu
point Allgemein >> Optionen [General >> Options].
