09
10
2.
Open the Faleemi App, click on the menu
icon
[More]
, Click on
[One key WiFi]
.
DC5V
RST
ETH
ANT
Plug
D
RST
ETH
ANT
NOTE
5 mins
Only when it blinks red and blue
slowly , should you start
to do the setup. It lasts
only 5 mins
after the camera is powered up.
If you don’t do the setup in 5 mins, please
unplug the camera and plug it in again to
get another 5 mins setting time.
1.
Please
put your camera close to your
WiFi router
and plug it in, you will hear
“Beep”
. The camera is initializing by
rotating from left to right and up to down
and stop in center finally. And then you
will see the red and blue lights are
blinking slowly.
Setup Option B
Setup Option B
Note: when the camera is startup,
Note: when the camera is startup,
it will sound one
it will sound one
“Beep”
3.
Enter your 2.4GHz WiFi password,
Click on
[Configuration]
.
4.
After the configuration is succeeded,
the camera will sound with 2 Beeps.
Beep
Beep
Note:
Note: When
When click on "
click on "Configuration
Configuration"
"
button. Your phone will make a loud
button. Your phone will make a loud
sound to transmit the data to the camera.
sound to transmit the data to the camera.
Put your phone
close to
the camera
Troubleshooting
1. If you see the blue light goes off instead of
solid on, the WiFi password you just input
may be wrong. Please reset the camera
(instructions in
Page 28
) and do the setup
again.
2. If your WiFi password was correct but still
failed, the WiFi you were connected may be
5GHz WiFi.
3. If all your WiFi and password were correct, it
is still failed, there may be the special
characters apostrophe (
‘
) and ampersand (
&
)
in your WiFi SSID or password.
Click on it to make sure your
Click on it to make sure your
WiFi password is correct.
Setup Option B: Step 1 / One Key WiFi
Model: FSC881
Quick Start Guide
1080P Pan/Tilt Wireless Network Camera
