Add camera
6.
Click on
[The blue light is flashing
slowly]
.
7.
Type in the name you have selected for
your camera and click on
[Next]
.
123456
4.
Click on
[Add cameras via WiFi
configuration guide]
.
QR Code
1.
Please
put your camera close to your
WiFi router
and plug it in, and then you
will see the red light is blinking slowly.
Router
2.4GHz
5.
Please scan the QR Code at the bottom
of the camera.
If you can’t scan the QRcode,
If you can’t scan the QRcode,
please click on
please click on
[Skip]
Please use the default username of
Please use the default username of
admin
admin
and password of
and password of
123456
123456
here.
here.
You can change them when the camera is all
You can change them when the camera is all
set up. You will find the instructions in
set up. You will find the instructions in
Page 18.
Page 18.
2.
Press the Set Button
(a protruded
black Dot)
for about 3 seconds until you
see the red light changes to a blue light.
The camera has been in
WiFi
configuration mode
.
1.
Press down
Set Button
3s+
2.
The Blue light
blinking slowly
Model: M1
Mini Camera
3.
Open the Faleemi App, click on
[Add Camera]
.
The Red light
blinking slowly.
04
03
if you can't scan the QR code, please enter the
if you can't scan the QR code, please enter the
DID (something like
DID (something like VIEW-1234567-ABCDE
VIEW-1234567-ABCDE)
in the label on the camera manually.
in the label on the camera manually.
If you see this, please click on
If you see this, please click on
[OK]
Smart Reliable Secure
Smart Reliable Secure
Quick Start Guide
1080P Mini WiFi Security IP Camera
Model: M1
CAUTION: The button is small. Holding
for longer than 10 seconds will reset
the camera.