Timing screen off
This function can close screen automatically, make camera work
on low power consumption. In system menu, it has four mode options
“off/30s/3m/5m” to choose. When choose “3m”, the screen will turn off
automatically in 3 minutes if no operation, camera is still working. This function is off
on default mode.
Battery charge
Connect Dash cam with external power supply, red indicator light is
on, that means battery is charging. The red indicator light will grow dark when
battery grow full, and light will be off when battery is full charged.
3.Installation Instruction
4.1 Close car engine.
4.2 Insert TF card into the camera.
Note: Please use high speed TF Card (Class6 or above) with a minimum capacity or
8GB and a maximum of 256GB. This unit includes a 32GB microSD Card
4.3 Fix Dash cam to car wind shield by Dash cam bracket. Clean windshield first
before you install mount on windshield.
4.4 Insert car charger to cigarette light.
4.5 Connect car charger power interface to Dash cam power socket.
Note: When wiring, installer can put power extend wire along the edge of the car
windshield to hidden.
4.6 Adjust lens position, make sure the lens has the same level as ground.
4.7 Start engine to check the camera is installed well or not.
Note: If the Dash cam is installed right, system indicator light will be on, when device
is on, Dash cam will start recording, video indicator light will flash.
