B)
功能示意图
Panel Diagram
A)
产品概述
Product Overview
C)
操作
说明
Operating Instructions
DVR
系列
LED
采用了独有的环型结构，适用于单灯摄影，并会给你的摄影带来一些意想不到
的精彩效果，比如无影、眼神光、增加影像的立方体感等 。
DVR
系列有多款不同泡数 LED 的灯，并有分可调色温和恒定色温的灯，客户可根据不同的用
光要求而选择不同的灯，是您的好帮手。
DVR
系列
LED
灯电路安全稳定，有调光功能，拥有亮度高色温稳定、节能及寿命长等优点。
LED DVR series applied with the unique ring structure which is suitable for single light shooting and may bright
some wonderful effect for your photography, for example, shadow less, eyes light, increasing the sense of
cube of the images, etc.
DVR series has many models which comes up with different numbers of LED and has diversify into colour
temperature adjustable and fixed colour temperature. Customers can use different model according to
different light requirements to make the shooting more effective.
LED DVR series has strengths in stable circuit, dimming function, high brightness , stable colour temperature,
energy saving and long life.
1
2
LED
灯泡
LED blubs
灯体
Lighting panel
电源开关
Power switch
相机支架
Camera Bracket
DC
电源插孔
DC power jack
普通调光后面板
Rear panel with dimming function
调白光旋钮
White Color temp. control dial
调黄光旋钮
Yellow Color temp. control dial
可调色温后面板
Rear panel with adjustable color temperature function
电源开关
Power switch
相机支架
Camera Bracket(RFL-L)
调光旋钮
Power Control Dial
DC
电源插孔
DC power jack
锁紧手柄
Fixation Handle
普通LED灯使用 LED Lighting with dimmer :
可调色温LED灯使用 LED lights with adjustable color temperature :
1.插入电源之前，请检查电源开关是否关闭状态。（电源开关拔到0是关闭状态拔到1是已打开状态。）
2.插入电源，打开开关后用户根据所需的光线扭动调光旋钮。
1. Please ensure the power is switched off before plugging the power cable into the socket (“0”=OFF, “1”=ON)
2. Power can be adjusted by the power control dial.
1.
插入电源之前，请检查电源开关是否关闭状态。（电源开关拔到
0
是关闭状态拔到
1
是已打开状态。）
2.
插入电源，打开开关后用户根据所需调节白光、黄光功率比例来调节灯的输出功率和色温，灯的输出
功率为黄光和白光功率之和
,
输出色温为
3000K-7000K
可调。
3.
用户如需暖色调，请将底下的黄光旋钮根据需要向右调节；当黄光调到最大，白光旋钮向左边调到最
小时，灯输出的功率为
50%
，色温为
3000K
。
4.
用户如需冷色调，请将上面的白光旋钮根据需要向右调节；当白光调到最大，黄光旋钮向左边调到最
小时，灯输出的功率为
50%
，色温为
7000K
。
5.
白光和黄光的输出
功率
相等时，色温为
5000K
；如当白光旋钮和黄光旋钮同时调到最大时，灯输出
的功率为
100%
，色温值是
5000K
。
1. Please ensure the power is switched off before plugging the power cable into the socket (“0”=OFF, “1”=ON)
2. Inserted into the power supply and switch on the power. User can adjust the power output and color
temperature of the LED by adjusting the white and yellow ratio as they desired. The LED output power is the sum
of yellow and white LED. The output color temperature will be 3000K-7000K adjustable.
3.If user desire for a warm colour temperature, please turn the yellow LED knob located at the bottom to the right
follow by the user’s need. When the yellow LED comes to full power and the white LED knob turn to the left into
minimum output, the LED panel output will be 50% and the colour temperature will be 3000k.
4.If user desire for a cold colour temperature, please turn the white LED knob located above yellow LED knob to
the right. When the white LED comes to full power and the yellow LED knob turn to the left into minimum output,
the LED panel output will be 50% and the colour temperature will be 7000K.
5.When the output of both white and yellow LED comes to equal, the temperature colour will be 5000K. When
both yellow and white LED output comes to 100%, the colour temperature will be 5000K.
