OM48017A
STORAGE & INSTALLATION
If the unit is to be stored, it is recommended to
refresh the internal battery at least once every
90 days. To do this, plug the system in, turn
the power On/Off switch “ON” and allow to idle
for at least 24 hours.
The SSG is designed for installation in a
protected environment. The system is
lightweight and can be easily moved. Some
important points to consider when positioning a
unit for operation:
•
A 15A (preferably dedicated) outlet is
accessible for the eight foot power cord
supplied with the unit. It is not recommended
to modify the supplied cord in any way nor
should an extension cord of any kind be
used.
•
The cord paths in the system installation
should remain clear of foot traffic or anything
else that may disturb permanent connection.
•
The installation site should maintain an
ambient air temperature of less than 1 04”F
(40”C). When the environment for the
system remains cooler during operation,
there is less stress on the batteries and the
internal electronics.
•
The air inlets, vents and fan should not be
obstructed or blocked in any way. The more
breathing space the system has, the cooler
it operates.
•
The air should remain free from excessive
dust and chemical fumes.
•
The unit may be placed on a desktop with
your computer equipment or along side the
desk or console. It may be placed in any
position, except upside down, provided that
all the above requirements are maintained
.
Once a location has been selected and the
unit is installed, it is ready for operation.
ALLOW AT LEAST 24 HOURS, AFTER THE
SYSTEM IS FIRST INSTALLED, TO FULLY
CHARGE THE INTERNAL BATTERY TO A
MAXIMUM STATE
.