•
Changing the Drive Connectors
Step 1
1. Using the Mapex drum key
supplied with the Falcon
pedal, turn the drum key
screw counter clockwise
until the screw is completely
loosened.
2. Lift the chain and the drum
key screw off of the cam.
Step 2
1. Using the Mapex drum key
supplied with the Falcon
pedal, turn the drum key
screw counter clockwise
until the screw is completely
loosened.
2. Remove the chain from the
pedal completely.
•
Changing the Falcon Cam
Step 3
1. Place the alternative cam back onto the drive shaft cam
collar.
2. Using your Mapex drum key turn the screw clockwise until
the alternative cam is secure to the drive shaft cam collar.
3. Place the chain with the drum key screw onto the cam.
4. Using the Mapex drum key turn the drum key screw
clockwise and secure the chain to the cam.
•
Changing the Falcon Spring
Step 3
1. Install the new spring onto the holder.
2. Place the spring holder back onto the shaft.
3. Using the Mapex drum key supplied with the Falcon pedal,
turn the drum key screw clockwise until the falcon spring
holder is tight and secured.
•
Falcon Footboard Angle Adjustment
1. Using the Mapex drum key supplied with the Falcon pedal
turn the drum key screw counter clockwise until the Mapex
Falcon Cam and footboard move freely.
2. Find the desired footboard height / position then using your
Mapex drum key turn the drum key screw clockwise until
the falcon Cam and the footboard are secured into your
desired position.
•
Falcon Toe Stop Adjustment
1. Using the Mapex drum key
supplied with the Falcon
pedal turn the drum key
screw counter clockwise until
the Mapex Toe Stop moves
freely.
2. Find your desired position
and turn your mapex drum
key clockwise to secure into
position.
•
Changing the Falcon Cam
Step 1
1. Using the Mapex drum key
supplied with the Falcon
pedal turn the drum key
screw counter clockwise
until the screw is completely
loosened.
2. Lift the chain and the drum
key screw off of the cam.
Step 2
Using the Mapex drum key
supplied with the Falcon pedal
turn the drum key screw holding
the cam counter clockwise until
the cam can be completely
removed from the drive shaft
cam collar.
•
Changing the Drive Connectors
Step 3
1. Install the Strap Connector to the bottom of the Falcon
footboard by using the drum key screw.
2. Using the Mapex drum key turn clockwise until secure.
3. Install the top of the Strap Connector to the cam by using
the drum key screw.
4. Using the Mapex drum key turn clockwise until secure.
MEMO
7
11
8
12
9
13
10