12
Attach steel
plate to vehicle
using adhesive
Magnetic base
of camera sticks
to steel plate
The base of the camera is
magnetic, if you have a suitable
steel surface you can attach the
camera directly to that.
If you don’t have a suitable steel
surface you can attach the included
white steel plate to your vehicle
using the included adhesive.
Be sure to apply a thick layer of
adhesive and allow at least 24
hours for it to dry before use.
Attaching the optional rear view camera to
your motorhome or caravan
To charge your camera pull the orange cover on the
rear of the camera and plug the charge lead in, con-
nect the other end of the charge lead to one of the
included adapters to charge the camera. The camera
should reach a full charge
in approximately 4 hours.
The LED on the camera is red
when the camera is charging
and switches off when the
camera is fully charged.
Charging the camera
View online