39
BACNET Configuration
This page lets the administrator to set BACNET configuration in the USHA.
BACNET Control
This is the parameter enabling or disabling the BACNET protocol.
BACNET ID
This field allows the administrator to set the specific ID for the user that allows to access the
USHA via BACNET protocol.
Neighbor Configuration
This page lets the administrator to set Neighbor Discovery Protocol (NDP) configuration in the
USHA.
Master or Slave
To set the USHA to be master or slave device.
Slave Address
This field will display the IP address of the device.
Alarm Number
Number of current active UPS alarms.
Alarm Description
This field will display the complete UPS alarm description.
Remove
This field allows user to remove the device.
EMD Configuration
This page allows user to configure all necessary parameters of an EMD.
Sensor Name
Configure the name of a sensor (or device) with up to 15 characters.
Set Point
The threshold of a sensor (Temperature or Humidity) will trigger an alarm, whenever the
measurement is over (high) or under (low) the set point. If the checkbox is not filled, the
