19
7.1.3 Unscrew and remove as shown
Set DIP switch settings on new control switch to match removed switch.
7.1.4 Re-assemble in reverse order.
7.1.5 LED`s are polarity driven with the Green cable negative and the purple cable
positive. The Green cable connects to the spade above LED body flat side.
7.2 OVEN DOOR REMOVAL
THE HINGE SPRING SHOULD BE UNDER TENSION AND NO ATTEMPT
SHOULD BRE MADE TO REMOVE THE PINS WHEN DOOR IS OFF
7.2.1 Turn off and cool down.
Summary of Contents for i91104
