G2962, G2994
Manual-tilt Bratt Pans
G2965 and G2995
Auto-tilt Bratt Pans
INSTALLATION and SERVICING
INSTRUCTIONS
These appliances must be installed and serviced by a qualified person as stipulated by the Gas Safety (Installation &
Use) Regulations.
IMPORTANT
The installer must ensure that the installation of the appliance is in conformity with these instructions and National Regula tions
in force at the time of installation. Particular attention MUST be paid to -
I.E.E Regulations for Electrical Installations
Electricity At Work Regulations
Gas Safety (Installation & Use) Regulations
Health And Safety At Work etc. Act
Local and National Building Regulations
Fire Precautions Act
Detailed recommendations are contained in Institute of
Gas Engineers published documents:
IGE/ UP/ 1, IGE/ UP/ 2
BS6173 and BS5440
These appliances have been CE-marked on the basis of compliance with the Gas Appliance Directive, EMC and Low Voltage
Directive for the Countries, Gas Types and Pressures as stated on the data plate.
WARNING - TO PREVENT SHOCKS, ALL APPLIANCES WHETHER GAS OR ELECTRIC MUST BE EARTHED.
On completion of the installation, these instructions should be left with the Engineer -in-Charge for reference during servicing.
Further to this, The Users Instructions should be handed over to the User, having had a demonstration of the operation and
cleaning of the appliance.
IT IS MOST IMPORTANT THAT THESE INSTRUCTIONS BE CONSULTED BEFORE INSTALLING AND COM MISSIONING
THIS APPLIANCE. FAILURE TO COMPLY WITH THE SPECIFIED PROCEDURES MAY RESULT IN DAMAGE OR THE
NEED FOR A SERVICE CALL.
PREVENTATIVE MAINTENANCE CONTRACT
In order to obtain maximum performance from this appliance we would recommend that a maintenance contract be arranged
with SERVICELINE. Visits may then be made at agreed intervals to carry out adjustments and repairs. A quotation for this
service will be given upon request to the contact numbers below.
WEEE Directive Registration No. WEE/DC0059TT/PRO
At end of appliance life, dispose of appliance and any replacement parts
in a safe manner, via a licens ed waste handler.
Appliances are designed to be dismantled easily and recycling of all
material is encouraged whenever practicable.
Falcon Foodservice Equipment
HEAD OFFIC E A ND WORKS
Wallace View , Hillfoots Road, Stirling. FK9 5PY. Scotland.
SERVICELINE CONTACT
Phone: 01438 363 000
Fax: 01438 369 900
T100723 Ref. 3
