/
...
Activating/deactivating display of the area code
You can set the telephone so that the area code is not displayed for incoming calls.
This can be useful, for example, if you cannot see the last digits of a long phone
number on the display.
You can deactivate the display for 2 area codes (up to 5 digits each).
Initiate
function.
If no number has been set in a storage location appears
in the display.
If both storage locations are in use, these are displayed
side by side; the current storage location to be edited
ÀDVKHV
If necessary, use the key to toggle between the
storage locations displayed to edit them as follows:
Delete a number:
Press the Set key.
Enter a number:
(QWHUDRQHWR¿YHGLJLWQXPEH
r.
Enter another pre
ķ
x:
Press the last number redial key
HQWHUQH[WSUH¿[
Press the Set key.
"You have a message" display
Deleting entries in the calls list
Delete all entries at the same time
Press
the
Down/Up
key.
Press the Set key, star key and Set key one after another.
The calls list is deleted and closed.
Delete
individual
entries
Scroll to the desired entry.
Press the Set key twice.
The
entry
is
deleted.
Calling Line Identi
ķ
cation
10
Different PBX offer services for saving messages (e.g. voice mail services). If one
or more newly received messages have been stored inside the PBX, it may
inform you via your telephone. In this case, the “Massage Waiting” ( ) lamp will
blink rapidly until you delete all the massages from the voicemail.
Summary of Contents for FT5020
Page 1: ...User Manual 21 7...
