8
Setting exchange code
When saving number, it's possible to enter Pause, to get outside line at PBX.
For details, look at "Dialing Pause" on pg. 5.
Recall key (use on private PBXs)
During a trunk call, you can make an enquiry call or transfer a call.
To do this, press the recall key . The next step depends on your PBX. In the
factory setting, the recall key function is set to a flash time (interrupt time) of
285ms to permit new features to be used on public telephone systems. When your
telephone is connected to a private PBX, it may be necessary to change the flash
time (e.g. 101ms). Please check the operating instructions for your PABX.
Note: Recall key is also used to initiate conference call, when the PBX allows the
function.
Setting the flash time for the recall key
Lift the handset, then start the function.
Select 0 or 1 (0 = 101ms, 1=285ms default)
Press the set key, then replace the handset.
If your telephone is not functioning correctly
• Handset off-hook, no dial tone:
Is the connecting cord correctly inserted in the telephone and the wall socket?
• A dial tone is audible, but dialling is not possible:
The connection is OK. Is the dialling mode correctly set? See Switching the dialling
mode.
• PBXs only: Connection fails or is incorrect when a number is dialled from
memory (e.g. redial, speed dialling):
Program the exchange code.
• Recall key not working:
Set a suitable flash time.
Operation at private PBXs
/
Summary of Contents for FT5010
Page 1: ...Operating instructios Whole new experiance FT5010...
Page 11: ...9...
